Gears in the rear
#32
Dortiz .. whells are for sale till gone .. first post was here ...
And on the gear swap ... your rear diff is a full floater, and you will need a ring and pinion and a master install/bearing kit ... not for the back yard guys ... need to make sure you get the pinion done correct or you will be buying and doing it all again real soon ...
And on the gear swap ... your rear diff is a full floater, and you will need a ring and pinion and a master install/bearing kit ... not for the back yard guys ... need to make sure you get the pinion done correct or you will be buying and doing it all again real soon ...
The following users liked this post:
hobbieman (02-24-2014)
#37
What rear end ratio is in my Ford , do I have positraction? - Drivetrain.com
Look on the door sticker in your truck, at the bottom it will list axle codes, apparently mine was 39 so looks like I have 3.55
Look on the door sticker in your truck, at the bottom it will list axle codes, apparently mine was 39 so looks like I have 3.55
The following users liked this post:
hobbieman (02-23-2014)
#40
I did some searching and I found a chart that says I have 3.55's. The ZF must have some major gears to make 1st gear so low. Here's a link
What rear end ratio is in my Ford , do I have positraction? - Drivetrain.com
What rear end ratio is in my Ford , do I have positraction? - Drivetrain.com