Somebody was asking about stacking just 4 gauges
#1
Somebody was asking about stacking just 4 gauges
Sombody was running a tuner they liked and was asking about stacking a second tuner so they could use it just for gauges.
If you have an android OS phone, there is an app called garmin mechanic that can be run (needs an adapter) to show on board gauges.
It's original base is to be a basic trip computer but can be expanded to be a gauge system, might be worth you time to look into it.
I didn't look much further than what i told ya here. Down side will be ZERO support if ya can't get it to work. It is only going to read what the computer is, so if ya have any foolers installed you will get false readings.
It has a ton of other capabilities for diagnostics, to include code clearing.
If you have an android OS phone, there is an app called garmin mechanic that can be run (needs an adapter) to show on board gauges.
It's original base is to be a basic trip computer but can be expanded to be a gauge system, might be worth you time to look into it.
I didn't look much further than what i told ya here. Down side will be ZERO support if ya can't get it to work. It is only going to read what the computer is, so if ya have any foolers installed you will get false readings.
It has a ton of other capabilities for diagnostics, to include code clearing.
#2
#4
#5
I tried to run my Edge Comp and Edge Juice with Attitude at one point. The Comp was for fueling, and EJWA for gauges. I made a Y harness for the CAN under the hood to share information. It did NOT work. It did throw any codes, but the two boxes fought one another, and I had close to stock power.
#6
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
General Diesel Related
0
05-01-2015 08:10 AM
carid
Diesel Bombers Sponsors
1
12-09-2014 03:58 AM