what do most of you guys run when sled pulling, reason i ask, i am now head tech inspector for about 1/2 of the diesel truck pulls in Florida, i want to run a 64mm/2.5 inch class but i know ALOT of guys are running a 66mm charger and they are over the 2.55 plug size, if there is enough off the shelf 66's being sold i might just go to 2.6 and let people run the 66mm chargers. problem with that is they wont be legal to run anywhere else, i really want to just stay with a 64 but i want your guy's opinion.

tell me what you guys think about this.

 

Alot of guys run the 66 but usually have an inlet adapter to run the 2.5 class. but still be able to run witha 66 when they are allowed. There are also places that wont even allow the inlet reducer. It would be fine if the guys you allow to run(including yourself) only run at the events that alllow it.

 

we decided on a 66mm, just easier and a couple of other associations have went to 2.6 so were ok......we dont allow reducers......i wont be pulling for a long time, i got to decide what im building, my dodge into a 2WD puller or waiting to get my 2.5 rock's and t-case.......