dynomat? or something else
#1
dynomat? or something else
ok guys i noticed either my pilot bearing or throught bearing is scwealing sometimes bad sometimes not. i dont want to pull the tranny just yet since i just rebuilt the motor. i was wondering if a person could put some of that dynomat stereo noice block in to reduce the noise level. is there any other sound proofer i could use to rap the belhousing with till i get the ambition and time to pull the tranny this summer?
#3
#4
#5
#7
#8
much better stuff out there than dynomat. Sheet lead works very well!
dynomat does not block sound like lead. It just changes the frequency which the metal reverberates. Foam will absorb some noise, but does not add mass and change the reverberation.
check your local roofing supply place or get mass loaded vinyl MLV like they use in home theaters. You will be much happier.
dynomat does not block sound like lead. It just changes the frequency which the metal reverberates. Foam will absorb some noise, but does not add mass and change the reverberation.
check your local roofing supply place or get mass loaded vinyl MLV like they use in home theaters. You will be much happier.