Traction Bars
#1
Traction Bars
Man do I need them BAD! I decided to do 2 burnouts today for some reason and man does the truck hop with the 35's on! On the second one it bounced so hard it pulled the exhaust apart at the down pipe! I was straight piped for the day and I do miss it.... I have the mounts I want piced out, what size dom does everybody run and what kind of links? I'll need these sooner or later....
#2
More info here than you asked for, but the stuff you are looking for is in there, too.
In case you don't want to search for what you are looking for, I used 2" .250 wall DOM (It was leftover) and 3/4" X 3/4" heims.
First, I made this:
https://www.dieselbombers.com/cummin...kid-plate.html
Then I made these:
https://www.dieselbombers.com/cummin...tion-bars.html
In case you don't want to search for what you are looking for, I used 2" .250 wall DOM (It was leftover) and 3/4" X 3/4" heims.
First, I made this:
https://www.dieselbombers.com/cummin...kid-plate.html
Then I made these:
https://www.dieselbombers.com/cummin...tion-bars.html
#3
Yes that the write up I was looking for!
---AutoMerged DoublePost---
Now that I think about it, my gf is down in Phonix for the races. I shoulda drove down and left my truck with your for those 6 days that shes down there
---AutoMerged DoublePost---
Now that I think about it, my gf is down in Phonix for the races. I shoulda drove down and left my truck with your for those 6 days that shes down there
Last edited by Red_Rattler; 04-17-2009 at 07:41 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
rvlmeyer
Dodge Truck and Cummins Turbo Diesel Forum
0
02-15-2015 03:36 PM
Cumminsfreak24
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
01-21-2015 09:10 AM
carid
Diesel Bombers Sponsors
0
10-28-2014 08:42 AM