Im havin trouble with my tps. at idle it is only reading 0.2 volt and at wot it is 0.7. At idle it shouls read 1 volt and at wot it should be 3.5 volts. What would cause it to read so low. when i took it off to test it, it work just fine but on my pickup it does read correctly. Please help.

 

Gary may be able to help you out here

https://www.dieselbombers.com/24-val...tomy-apps.html

 

Can try to adjust it back to specs, but considering the age, it will only jump out of specs again. Only solution is replacement.

 

I hard there was a recall from dodge for this problem. has anybody else headr this