regular cab to quad cab conversion
#1
regular cab to quad cab conversion
Hello everyone, this is my first post!
I have a 1994 Dodge 2500 4x4 cummins with a nv4500. Frame is great condition and I also have a 1999 quad cab 4x4 1500. Good frame and cab. I need an extra cab and so I am going to swap the cab onto my 2500 frame. Has anyone done this on this forum? I know the rear axle has to slide back 4 inches and the fuel tank will interfere with the cab floor. In Maine we have state vehicle inspections and it will fail if I use a body lift...So I was thinking either lower the fuel tank or cut the floor of the quad cab and create a bump in the floor to clear the tank. Any thoughts?
I have a 1994 Dodge 2500 4x4 cummins with a nv4500. Frame is great condition and I also have a 1999 quad cab 4x4 1500. Good frame and cab. I need an extra cab and so I am going to swap the cab onto my 2500 frame. Has anyone done this on this forum? I know the rear axle has to slide back 4 inches and the fuel tank will interfere with the cab floor. In Maine we have state vehicle inspections and it will fail if I use a body lift...So I was thinking either lower the fuel tank or cut the floor of the quad cab and create a bump in the floor to clear the tank. Any thoughts?
Thread
Thread Starter
Forum
Replies
Last Post
Alaskabound
12 Valve 2nd Gen Dodge Cummins 94-98
4
08-20-2015 07:00 PM
rodbuilder
5.9 Liter CR Dodge Cummins 03-07
2
06-28-2015 08:23 AM
torino73
12 Valve 2nd Gen Dodge Cummins 94-98
0
04-14-2015 11:15 PM