need help fixing my dana 60...
#1
need help fixing my dana 60...
truck info: (2002 dodge ram 2500)so a couple days ago some a**hole decided to crash into my parked truck, he broke my knuckle my axle shaft and bent my steering... i can do the steering myself, the only thing im looking for help on is the dana 60, im looking for parts but i keep getting different spline counts so not sure which to use, and CAD i have no idea what that is, or if anyone has any for sale that fit my model would be great, heres some pics looks like the axle housing itself is good i wont really know until i get a new knuckle and see if everything aligns, let me know what yall think...
#2
Sorry about the bad luck. CAD is central axle disconnect and your truck probably doesn't have it, depends on the build date. Here is a link with more info and parts for sale http://www.quad4x4.com/DodgeDana60front2000-2002.html Hope this helps.
---AutoMerged DoublePost---
Looking closer at the top picture it looks like you do have cad. CAD will be on the back of passenger side of the axle housing. It will have two wires and a vaccum hose running to it.
---AutoMerged DoublePost---
Looking closer at the top picture it looks like you do have cad. CAD will be on the back of passenger side of the axle housing. It will have two wires and a vaccum hose running to it.
Last edited by Bryce; 12-09-2013 at 10:13 PM. Reason: Automerged Doublepost
#3
yea its a CAD axle ive been doing research and learning, removed ball joints, knuckle and housing looks good,we'll see im crossing my fingers... i found a used knuckle, bought ball joints, i removed axle shaft and its a 32 spline ive been looking for used with no luck so i might just buy it new.if anyone has a used 32 spline drivers side axle shaft let me know
Thread
Thread Starter
Forum
Replies
Last Post
gyayo2012
12 Valve 2nd Gen Dodge Cummins 94-98
7
11-15-2014 08:11 PM