I wish we could do this with our Ally's

 

 

yes here is the link for the 2nd gens and I have done this its easy

---AutoMerged DoublePost---

http://www.tstproducts.com/Torque%20...p%20Switch.pdf
oops

 

Hello,
I have a common problem You might have an answer for. I am out in California with a 2001 2nd gen modified 2500 with the above tranny switch but it sends a engine check light to my dash every so often then goes away for awhile probably clears after so many key turns then comes back. And I recall seeing a note in some mag about a ground needing some thing on California models only for the fix. I can't find anything on this here yet. Can you help us out this way? Jack Hilterbrandt

---AutoMerged DoublePost---

Hello,
I have a 2001 2500 modified with a switch and looking for the resistor for the ground and how to install it properly as I an getting a check engine light with the current set up on my California truck.Can you help me? Jack Hilterbrandt.

 

What does this lock up switch do?

 

Does anyone have a "how to" on a 2002? I looked at the link above and it had been removed or wouldn't pull up on my computer. Thanks for any help!

 

http://www.tstproducts.com/Torque Converter Lockup Switch.pdf


if you space out each word "torque converter lockup switch.pdf" it works or do a search for "Torque Converter Lockup Switch for ‘96-’02 Ram" if you can't find it let me know

 

here is the new link. they redesigned their sight and some links were changed

http://www.tstproducts.com/Torque%20...p%20Switch.pdf

 

ok you got it too. I have the pdf saved on my comp

 

Thanks guys!!