have you 2 run this

Pulse CM Firmware Updates:
File Name: Pre-Installer
UPDATED: 11/24/2008

Features:

If you are receiving Pulse or Commander Module not found error then download and run this file as it will reload the necessary drivers onto your computer.

Note: This is a silent install and once you run it from your computer you will not see anything happen but, you will be able to update your Pulse module.

1.) Download this zip file to your computer

2.) Extract the files from the zip file

3.) Run the PreInstaller.exe


and this one

File Name: USB Updater
UPDATED: 11/24/2008

Features:



* You must run the Pre-Installer first for this update to work
* Updates the USB to allow users to download Pulse Updates

1.) Run the Pre-Installer software located below

2.) Connect Pulse to your PC

3.) Click "Update USB Now"

4.) Disconnect Pulse and Close USB Updater

5.) Open Pulse update and follow on screen instructions.

 

Yep went through all that before and, with quad today on the phone. still no go. They are going to get back to me tomorrow with a new zip file of some kind

 

hope ya get it figured out quick

 

Thanks! Me too. The weather has been like ice and snow the last 2 days so I couldn't go play with it anyways

 

Bump

 

Well I got the pulse updated and played with a few different tunes yesterday. Wow! is this thing cool. Running comp tune and set pump stretch to 2200, timing to 10, and boost scale to 25. This is way to wicked to screw around with in the winter time. I think I may turn the timing down to 7.5 so I don't blow a head gasket this winter I should just take the s.o.b. out of my truck so I don't wreck my truck this winter What has everyone else tried? I will be trying some more I'm sure

 

Hey marine did you get your pulse updated? If not maybe I can give ya a little help

 

Just a hint Internet Explorer is a lot friendlier than firefox is to the quad stuff.

 

I made a tune where it made lots of smoke!
Timing 0
Timing scale 100
Pump stretch 2200
Can and Pump min 5 max 30
Boost scale 40
Not much performance but pretty smokey

 

Anyone sent theres in for the Firmware update?