Yeah you would need to lose 2 cylinders also :D

fuel pin
 

hello can any one tell me where i can purchase the dennyt stage 2 fuel pin thank you

PM user DennyT on dieseltruckresource.com

not sure if he hangs out here.

Nice :U:

hey can you guys tell me is it better just to grind off the old fuel pin then buy a new modifyed one???:humm:

---AutoMerged DoublePost---

hey could someone tell me is it better to grind off my fuel pin or buy a new one that alredy ground off??? need help:humm:

---AutoMerged DoublePost---

how much is one of those denny t fuel pins?

The Pins are $100 shipped (about half the cost of lesser aftermarket pins)

I have asked Denny to come sign up over here.

Bobby

For those interested Dennis Has put some of these up on Ebay

eBay Motors: Denny T Stage II fuel pin (item 190264883018 end time Nov-10-08 17:56:26 PST)

I got mine in yesterday. It is aright. It is certainly not what I read from other people's accounts... it's alright, but it's not woohooooooo this thing rocks!!! If you know what I mean. Maybe it's because my truck is an auto, I dunno.

Mines an auto too... Run it a while and pull it out to check the mark on it to make sure you get full travel. I had a boost leak and the pin was not traveling all the way. Also what else you have done to the truck?

I have no boost leak, I did gain about 2 lbs doing the pin though.

Denny T contacted me.. I guess if you haven't turned the pump up, the pin is not as effective as it can be...

My pump requires a 1/4" extension to the full power pin which I haven't done yet, so my pump is basically running stock right now. When we did the 366 spring we turned the screw all the way and nothing happened.