Super B Turbo Charger Install
#11
Connect the Oil return line to the charger
OMG WTF the oil return line is hitting the Waste Gate ,,, ARGH !!
Over the next hour the Return line was on and off the truck 10 times , bending it , smashing it , Pry bar , Big Hammer , Vise and even a log splitter was involved , Some Tools Flew some tears fell Then i read the manual and it says to bend the waste gate ... IE see first post
Tail gate View Changing
OMG WTF the oil return line is hitting the Waste Gate ,,, ARGH !!
Over the next hour the Return line was on and off the truck 10 times , bending it , smashing it , Pry bar , Big Hammer , Vise and even a log splitter was involved , Some Tools Flew some tears fell Then i read the manual and it says to bend the waste gate ... IE see first post
Tail gate View Changing
Last edited by DB Admin; 03-28-2008 at 11:35 PM.
#12
Now Add oil to the inlet of the charger (TOP) and spin the fins while you put it in , mine only took about a thimble full , Then add the oil inlet fitting from your stock charger and connect the oil inlet line , Then connect the intercooler line and Tighten up the 4 bolts on the charger that you used to spin it to make everything line up , Tighten up the down pipe clamp and everything else ..
Beef up the ban clamp , IE See first post
Reinstall Air Intake
Farewell old friend
When you fire it up it must idle for 3 mins to lubricate the charger ,
then Buckle Up and Celebrate .
End
DM
Beef up the ban clamp , IE See first post
Reinstall Air Intake
Farewell old friend
When you fire it up it must idle for 3 mins to lubricate the charger ,
then Buckle Up and Celebrate .
End
DM
#15
Ill die with a smile
The following users liked this post:
LOGANSTANFORTH (03-29-2008)
#20
I may be trading it for a lawn mower