Ezgo and a kubota
Thread Starter
|
Diesel Fan
Joined: Aug 2009
Posts: 55
Likes: 2
From: sullivan
Thanks 
fuel tank is mounted"still needs polished and a fill neck. Battery tray is mounted and started running fuel lines. Got the radiator, but im running out of room and jack. Radiator core is 12x12. 
fuel tank is mounted"still needs polished and a fill neck. Battery tray is mounted and started running fuel lines. Got the radiator, but im running out of room and jack. Radiator core is 12x12.
Thread Starter
|
Diesel Fan
Joined: Aug 2009
Posts: 55
Likes: 2
From: sullivan
Too much...but i like to do it
---AutoMerged DoublePost---
Thanks, hope to have it done soon
---AutoMerged DoublePost---
Im going to sleeve them for now and make sure everything works out,dutchman motorsports in portland OR can build the axles when im ready.....250 apiece tho
---AutoMerged DoublePost---
Thanks, hope to have it done soon
---AutoMerged DoublePost---
Im going to sleeve them for now and make sure everything works out,dutchman motorsports in portland OR can build the axles when im ready.....250 apiece tho
Last edited by stinkfist5.9; Apr 21, 2011 at 09:43 PM. Reason: Automerged Doublepost
Thread Starter
|
Diesel Fan
Joined: Aug 2009
Posts: 55
Likes: 2
From: sullivan
Ok heres my radiator and intercooler setup. Started on the hoses and piping.
---AutoMerged DoublePost---
Heres the Gt12 turbo that i will be using. Flanges are cut and ready to start welding pipe.
---AutoMerged DoublePost---
Heres the Gt12 turbo that i will be using. Flanges are cut and ready to start welding pipe.
Last edited by stinkfist5.9; May 5, 2011 at 10:12 PM. Reason: Automerged Doublepost
