99 chevy 2500 4x4 recieving a 5.9 transplant
#1
99 chevy 2500 4x4 recieving a 5.9 transplant
Hi guys,
We are getting a fun project at our shop! We are going to make a step in the right direction by amputating a 6.5 td from this Chevy truck. The organ doner is a 96 Cummins 5.9. We are looking at a Allison 535 or a 545 trans for this project. Problem may include tranfer case to trans mounting. Any one done one? We will keep y'all posted from time to time.
Any pitfalls we can avoid because of prior trial and error by y'all would make this much more fun for us and y'all. That way we can all gain some smarts and get better at what we do best.....makin smoke.
We are getting a fun project at our shop! We are going to make a step in the right direction by amputating a 6.5 td from this Chevy truck. The organ doner is a 96 Cummins 5.9. We are looking at a Allison 535 or a 545 trans for this project. Problem may include tranfer case to trans mounting. Any one done one? We will keep y'all posted from time to time.
Any pitfalls we can avoid because of prior trial and error by y'all would make this much more fun for us and y'all. That way we can all gain some smarts and get better at what we do best.....makin smoke.
#2
#3
#4
transplant
As things go, so goes this. We need help with a charge air cooler for this beast. What fits close and doesn't require days of modification to get it in correctly? Performance Radiators has coolers for D-max and everything else but I know there is some genius that has already solved this challenge. Any guided direction would be greatly appreciated.
As we progress we will send pics and info.
Thanks diddydoc2
As we progress we will send pics and info.
Thanks diddydoc2
#5
most people i know use a 24 valve cummins IC. Basically get the IC, a summit aluminum radiator that fits in it, take off the grille, take out the radiator, and start cutting until it fits. you have to trim the headlight adjusters iirc. Its very possible but you just have to get it together and start cutting until it fits, when you hold it up to the front of the truck it just looks like there's no way. I think autoworld includes some instructions with the mounts on how to make it work as well.
---AutoMerged DoublePost---
I have a dmax IC and it basically won't work. the body mounts and front of the chassis would have to be really modified to get it to sit low enough to clear the hood.
---AutoMerged DoublePost---
I have a dmax IC and it basically won't work. the body mounts and front of the chassis would have to be really modified to get it to sit low enough to clear the hood.
Last edited by FastCR; 10-08-2010 at 03:18 PM. Reason: Automerged Doublepost
#6
Thread
Thread Starter
Forum
Replies
Last Post
david.burger
Diesel In Distress - Support Ticket
2
05-30-2015 08:25 AM
river rat
24 Valve 2nd Gen Dodge Cummins 98.5-02
3
05-18-2015 05:04 PM
Diesel Bombers
General Diesel Related
0
12-15-2014 01:10 PM