|
hello im looking in doing the same thing as u so u have to make it solid axle or it wont work? wellthat sucks lol but i have a 14 bolt rear and a dana 44 on a frame with all the leaf springs and everything so that should help i have the complete engine no trans trying to figure ouut wat to do there the cummins im putting in is a 95 12 valve with all arp studs including main and head ceramic coated pistons balanced 60# valve springs 4k governer springs 0 plate no afc 370 marine injectors and .093 injector lines than its gonna have the hx40 as the little turbo and a turbo off a c12 cat as the big turbo still need to go threw and get my truck painted its just white and primer right now so i was just wondering if u had and tips for me
|
just a word of advice:
dana 44 vs weight and stress of a cummin = failure |
I dig the block color.....also makes it easy to spot leaks :)
|
Originally Posted by billyrb
(Post 481078)
I dig the block color.....also makes it easy to spot leaks :)
|
Originally Posted by tltruckparts
(Post 467362)
i bought a COMPLETE truck for my swap, and im just shy of 15,000 dollars invested. the cummins oil pan will not clear the stock ifs in a 4wd youll have to straight axle it as well. took about 4 months and 1000's of hours. if you dont have time or money, dont try, it isnt for the faint hearted
what cheap engine stand are you talkin about:scare2: that is a 700 dollar NORCO USA built engine stand made of all 1/4" steel with heavy duty casters Ohh yes it will. |
i couldnt get mine to clear for the life of me, if i moved it up any higher, it hit the hood. but also the transfer case was smack dab in the middle of the way of the torsion bar crossmember, so straight axlin it was just the way to go in every aspect. plus i wanted to do it eventually
---AutoMerged DoublePost--- and also whatd you do with your starter? my starter also hit the front differential as well. do you have a lift or anything or is yours all stock height? |
yeah, it will clear with IFS, many people have done it. Call up autoworld and ask them.
|
thats who i ordered everything from. i had the OD auto trans from the dodge and it was physically impossible to clear the t case. im sure you could do it with a non OD as its like 8 inches shorter, but thats the problem that i hit. i couldnt clear my starter at all from the driver side diff. that was a no go all the way around
|
Everything cleared just fine, I did crank the torsion bars up a little but nothing major. NO BODY LIFT EITHER. And I still have about 2" clearance from hitting my hood as well.
|
ya if i couldve cranked the torsion bars up i wouldve had clearance too i wouldve been fine.
im sure if i wouldve used the chevy tranny and transfer or even originally used the 5 speed now i have it wouldve cleared the torsion bar crossmember with a 2 piece driveline. i think it was the OD unit on the original 46rh i used that caused all my problems |
| All times are GMT -5. The time now is 07:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands