Fummins
#1
Fummins
Hey all. Ok my name is Joe Green, and I am fixing to begin building my fummins swap tomorrow.
What I have
1997 C and C Fsuperduty
Nothing wrong with it.
I also have a 1996 ram3500 cummins automatic.
My intention is to swap the rear end from the ram 3.54 gear drw into the ford c and c frame. By way of moving perches or what ever comes up I can fabricate for.
Then I will need to get my hands on a cummins 12v clutch kit, and a destroked cummins 12v to ZF5 adapter plate.
after that the fun begins with the engine removal and swap.
So here's what I need.
To pre sell if possible the powerstroke and everything that goes with it.
Come across a d60 for the front and t case so I can change the whole get up to 4x4
What all is needed from the cummins truck to power the cummins motor? Is it pretty self contained?
What I have
1997 C and C Fsuperduty
Nothing wrong with it.
I also have a 1996 ram3500 cummins automatic.
My intention is to swap the rear end from the ram 3.54 gear drw into the ford c and c frame. By way of moving perches or what ever comes up I can fabricate for.
Then I will need to get my hands on a cummins 12v clutch kit, and a destroked cummins 12v to ZF5 adapter plate.
after that the fun begins with the engine removal and swap.
So here's what I need.
To pre sell if possible the powerstroke and everything that goes with it.
Come across a d60 for the front and t case so I can change the whole get up to 4x4
What all is needed from the cummins truck to power the cummins motor? Is it pretty self contained?
Thread
Thread Starter
Forum
Replies
Last Post
Cumminsfummins
Ford Powerstroke 08-10 6.4L
2
01-26-2015 08:11 AM