He's a short video of the 1-2-3 shift The whine is no where near as loud in person as it is on the video
|
Well Rangmar just stopped by with his Sport trac. What a SWEET ride!! That truck is awesome! The motor is very smooth and surprisingly quiet. The auto trans is a nice fit for this rig, I want one!! It drives like it came that way from the factory, nice job and thanks for the visit!
|
Thanks fte. For everyone else. Did a 400 mile round trip today. I got 32.7 mpg. And did 75 most of the way with a few spurts of 80 and one to 95 just To see. It didn't miss a lick ran great pulled the hills fine and I was really happy overall. I still have a oil leak that I missed. The turbo drain And I will play a bit more with the tv cable. It shifts great but the 4-3 down shift leaves a bit to be desired. It likes to stay in forth a bit longer than I would like when you get on it.
|
4 Attachment(s)
|
Nice!! :tu:
|
4 Attachment(s)
I decided to upgrade my intercooler. I had a spare 4bt intercooler ive been itching to use and I got tired of blowing boots off. I went from 12 silicone couplers to 4. I had the pipes tig welded together
Attachment 31670 Attachment 31671 Attachment 31672 I upgraded to a superduty trans cooler for $hits and giggles. It wasn't necessary but it looks nice and more. Is better in this case. Attachment 31673 |
I also turned the fuel up just a Bit 3/4 turn on the fuel screw reclocked the fuel pit to the steeper ramp and 1 turn of the star wheel. Really woke it up
|
did you get a reading on how much the new intercooler dropped your IAT's from the old one? I am curious . I think my intercooler might be a little too big
|
I don't think you can have too big of an intercooler. I don't have any IAT sensors, but I can definitely see a slower climb on egts. What intercooler are you running?
|
29X11x3 inch cx racing. With 2.5 to 2" reduced pipes.
|
2 Attachment(s)
Just an update. I got tied of brackets breaking with the vacuum pump. I overbuilt it th e last time then it started breaking alternator brackets!!!
Attachment 31662Attachment 31663 so I went electric. This is from a turbo saab I made my own vacuum regulator using a old ford superduty vac pump .works great and has no trouble keeping up |
the whole thing looks really good, I wish these engines were more available. Did you try to cut your thumb off?. Not to hijack your thread but may I ask how you upload your photos? mine no longer work through Photobucket.
|
All times are GMT -5. The time now is 03:58 PM. |
© 2024 MH Sub I, LLC dba Internet Brands