kubota v2203 in 89 toyota pickup help
Thread Starter
|
Diesel Fan
Joined: Feb 2014
Posts: 95
Likes: 6
Haven't decided on it yet
finally got the oil pan today and I removed the bellhousing, oil pan and the flywheel. I discovered tht I have to use shorter bolts for oil pan because the bolts that held original pan are longer so after going thru my collection of bolts from honda, Toyota, nissans I was able to acquire 10 bolts few more to go maybe I will look harder tomorow bolts have to be correct pitch and metric otherwise I light destroy the threads
---AutoMerged DoublePost---
haven't
decided anything yet
finally got the oil pan today and I removed the bellhousing, oil pan and the flywheel. I discovered tht I have to use shorter bolts for oil pan because the bolts that held original pan are longer so after going thru my collection of bolts from honda, Toyota, nissans I was able to acquire 10 bolts few more to go maybe I will look harder tomorow bolts have to be correct pitch and metric otherwise I light destroy the threads
---AutoMerged DoublePost---
haven't
decided anything yet
Last edited by fijitec; Mar 3, 2014 at 12:28 AM. Reason: Automerged Doublepost
Diesel Enthusiast
Joined: Dec 2010
Posts: 443
Likes: 33
From: south Texas
if it is not too late you can get a complete set of short oil pan bolts from Sam at Lenards diesel www.parts-barn.com for $12 plus shipping
Thread Starter
|
Diesel Fan
Joined: Feb 2014
Posts: 95
Likes: 6
what fuel filters are you guys using on your v2203 swap im having to decide on that i want a filtersetup that is easily avalable and does the job i dont wana get all ballistic and spend lot of money on it something cheap and does the job
Diesel Fan
Joined: Jan 2014
Posts: 54
Likes: 0
Also searching for the same info. Any recommendations guys?
Diesel Enthusiast
Joined: Apr 2012
Posts: 143
Likes: 10
From my documentation I have:
Napa 3005 or Wix 33005
Filter head - Napa FIL4770 or Wix 24770 - same thing
Pre-Filter
NAPA 3270 or WIX 33270
This setup requires a return line, but there are filter heads that integrate the return. If I was doing it again I'd use on of those. Rangmar knows of a couple of them.
Sent from my SM-N900T using Tapatalk
Napa 3005 or Wix 33005
Filter head - Napa FIL4770 or Wix 24770 - same thing
Pre-Filter
NAPA 3270 or WIX 33270
This setup requires a return line, but there are filter heads that integrate the return. If I was doing it again I'd use on of those. Rangmar knows of a couple of them.
Sent from my SM-N900T using Tapatalk
Thread Starter
|
Diesel Fan
Joined: Feb 2014
Posts: 95
Likes: 6
Any ideas on what you guys did dpi dipstick? I was looking at other forums and they drilled the block I wonder if this is safe? Also I was looking on parts-plus website and they are out of dipstick....
