1999 ranger yanmar to kubota v2203 swap
#81
3000-3200 would be nice if for nothing else an Oh No RPM range. As in get out of the way speed. But I am not sure if you can push the Kubota much over 3000 RPM even though I have seen 3000 RPM numbers for the Skid Steer. But look as I might I have not seen a Red Line RPM limit posted for the Kubota V2203 Engine.
#84
Well adapters are supposed to be done tomorrow hopefully! So maybe by this weekend, I think these motors are probably making more like 140 or so but the torque should be really high. That's whats so good about these motors. got my turbo all cleaned up and in the middle of reassembly now I took some detailed sideways pictures!
#85
Well I have a testament to how strong these motors Are. I was playing around in the woods today a started to ford a creek I have a few times before and. I forgot about the rain we have been getting. Water went over the hood befor I could stop and it was too muddy to back out . I made it al the way through and and out the other side I opened the hood and the air filter had completely collapsed in on itself. I left the truck running while I removed the filter and I noticed the exhaust was steaming. I reved it a little and it started to miss I pulled the cold side inter cooler line and water flowed out I reved it with the line disconnected and blew about half a gallon out. Put it back together drove the 5 miles home and its perfect Pulled the intercooler and dumped another 1/2 to 3/4 of a gallon out.
That's real water injection who needs a pump
That's real water injection who needs a pump
#86
Well I have a testament to how strong these motors Are. I was playing around in the woods today a started to ford a creek I have a few times before and. I forgot about the rain we have been getting. Water went over the hood befor I could stop and it was too muddy to back out . I made it al the way through and and out the other side I opened the hood and the air filter had completely collapsed in on itself. I left the truck running while I removed the filter and I noticed the exhaust was steaming. I reved it a little and it started to miss I pulled the cold side inter cooler line and water flowed out I reved it with the line disconnected and blew about half a gallon out. Put it back together drove the 5 miles home and its perfect Pulled the intercooler and dumped another 1/2 to 3/4 of a gallon out.
That's real water injection who needs a pump
That's real water injection who needs a pump
#87
#88
Sorry what I meant was please let us know what spring to get to achieve the 3000-3200 RPM of the Kubota?
#89
Just wanted some input on what you all think the adapters are worth, a lot of people around here are saying 100 but that seems a little steep to me. Now of course I know you guys want the cheapest price possible. But id appreciate some honest input. Still not quite down maybe by this evening. They are one piece precision machined and will come pre drilled and tapped for an EGT gauge.
#90