1999 ranger yanmar to kubota v2203 swap
#112
98 hp @ 2200-
278 ft lbs @ 1800 !!!!!!!
Hp peaks at 2200 and stays almost perfectly flat to3000
Tq peaks at 1810 and doesn't drop till 2700 and was at 263?@ 3000
[color=grey][size=-2]
---AutoMerged DoublePost---
278 ft lbs @ 1800 !!!!!!!
Hp peaks at 2200 and stays almost perfectly flat to3000
Tq peaks at 1810 and doesn't drop till 2700 and was at 263?@ 3000
[color=grey][size=-2]
---AutoMerged DoublePost---
Last edited by Rangmar; 01-14-2014 at 04:39 PM. Reason: Automerged Doublepost
#115
#116
Rangmar that is GREAT. But for some odd reason the video does not work for me? Ok I got the 2nd vid to work. . Ok it was me both vids are the same . But still GREAT WORK. Who would have thought with a little turbo and a bit of turning of the fuel screw they would work this well.
I Forgot to ask was this with the Nitrous Oxide or without?
I Forgot to ask was this with the Nitrous Oxide or without?
Last edited by JesterGrin_1; 01-14-2014 at 06:59 PM.
#117
#118
#120
Thanks for all the input. I have to pull the exhaust manifold to replace the manifold gaskets. I'm planning on having the manifold and maybe the exhaust housing on the turbo ceramic coated.i just ordered the gaskets and a 90 degree t-stat housing for mine from Sam at Leonard's diesel I plan on having powerstreering soon and already planning the next truck