Did you hear the Sonic BOOM

---AutoMerged DoublePost---

Rangmar I for one will look forward to the Dyno report. But I know that you will not keep your 3000 RPM Governor Spring now that you have heard the Plane .

Why do I keep thinking The Plane The Plane The Plane .

 

Hi guys, I'm new on here and wanted to tell you how awesome you guys are! After reading everything that I could find about swapping Kubotas into Rangers, my wife is allowing me to start the planning/saving phase to follow in your footsteps. Keep up the good work!

Rangmar, were you able to get the Ranger on the dyno? I'm really interested in hearing those results.

 

Im going to try to dyno in may, we have a diesel club in Missouri and it only costs $35

 

Did you get yours running correctly? And if so what did you nail the trouble down to?

 

Its running pretty good now! still think I could get a little more out of it, I changed my governer spring but I still think it could stand a little stiffer, wish I knew my RPMS I need to get that sensor going now that im in OKlahoma at school and always bored

 

" TINY TACH" for a quick easy accurate diesel tach, $125, and you can take it with you to your next project they work off injector line pressure pulse and 12vdc. MADE IN USA. I really like mine a lot. If I can get my OE dash tach to work that would be great, but for getting up and running quick and easy This little TinyTach is hard to beat.

 

Look at post #23, Rangemar used the crank sensor, I used a 2 wire ABS sensor in the same location with notches on the pulley wired to the factory tach. Ten bucks for the sensor and a little effort , save a lot of $$ and have a factory setup.

 

FTE where can one find the Sensor for $10.00?

 

My local discount parts store, autozone has it for 13.00 napa 16.00, or free in my case. it came out of the rear axle I swapped out.

 

Well today is the day. My appointment is at 1 for my dyno run