Just turned the key 3 times fast?

 

there is another code
try it again and wait longer for the next code it probably wasnt done yet

 

When is did it it went p1693 then p done. Do i keep waiting!? I'll go try it again!

---AutoMerged DoublePost---

Actually after p done it goes back to the odo

 

thats very strange...i would clear the codes first...then do a apps relearn...ill post a link on relearn for ya...then drive it and see if the light comes back on....my truck has codes stored but no light on

---AutoMerged DoublePost---

you must relearn the new t.p.s.after both batteries are re connected insert key,only turn until dash lights come on.DONT START IT! after dash lights come on slowly push the gas petal all the way down.then let off slowly[not really slow it should take about six seconds down and six up.this time frame is just to explane what i call slow]now turn key off.you just relearned the t.p.s. now you can start it.

 

Ok thank you! I should delete that code first?

 

yeah just start over and leave the edge off of it till you figure out the problem....i relearn my apps about once every 2 months or so...it makes a bigger difference i have found on automatics

 

Ok i just deleted the codes and i noticed a p0237 while checking rhem with the actual box. I tried the thing you said but I'm not sure how to tell it it worked atfer pressing the throttle slowly and letting off slowly.

 

you just turn the key off and you should be good...on the code- did you ever turn the key on with boost sensor unplugged