won't start
#11
CSIPSD, We replaced the Injector Driver Module No change. In the morning we will try to unplug the bowl heater and replace the fuse and see what happens. Even with the new one we get the 1298 code.
---AutoMerged DoublePost---
After we replaced the ICM the P1298 code dissapeared still wouldn't start. Unplugged the bowl heater replaced the fuse and it started right up. Found a wire shorted out and replaced but the heater wire itself was also shorted out. Seems to be running fine now.
THANKS everyone for the helpful suggestions on where to look.
---AutoMerged DoublePost---
After we replaced the ICM the P1298 code dissapeared still wouldn't start. Unplugged the bowl heater replaced the fuse and it started right up. Found a wire shorted out and replaced but the heater wire itself was also shorted out. Seems to be running fine now.
THANKS everyone for the helpful suggestions on where to look.
Last edited by smokeybee2; 05-18-2011 at 02:36 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
cjgregory
Diesel In Distress - Support Ticket
0
03-31-2015 01:45 PM
ronstop
5.9 Liter CR Dodge Cummins 03-07
0
02-26-2015 09:48 AM
carid
Diesel Bombers Sponsors
0
11-18-2014 06:49 AM