98 dodge won't start
#1
98 dodge won't start
i have a 98 dodge 12valve that won't start with the key, and when this happened the windows will not roll up or down and the door locks will not work either. you can push state it but when you want to start it with the key everything acts likes it wants to start but i will not engage the starter
#2
sounds like you need new starter contacts.......................check em out here
Larry B's
LarryB's Dodge starting problems solved here.
Larry B's
LarryB's Dodge starting problems solved here.
#3
Thanks but before it did this when it would do this before you could wiggle the key and it would start it acts like a relay or its a short maybe i was wondering if there was a way to by pass the key switch to make sure the starter is ok
---AutoMerged DoublePost---
still need help anybody else have any ideas why it won't start with the key
---AutoMerged DoublePost---
still need help anybody else have any ideas why it won't start with the key
Last edited by 370fire; 01-10-2011 at 01:26 PM. Reason: Automerged Doublepost
#4
Ive never done it or even had the column open but I would guess that you should be able to jumper the switch...like hot-wiring it.
You will likely need a wiring diagram.
You will likely need a wiring diagram.
Thread
Thread Starter
Forum
Replies
Last Post
Mac1997
24 Valve 2nd Gen Dodge Cummins 98.5-02
2
07-13-2015 05:08 AM
mtvivan
5.9 Liter CR Dodge Cummins 03-07
11
01-22-2015 06:14 PM