Raptor lift pump wireing issue!
#1
Raptor lift pump wireing issue!
The instructions say during installation to put the red wire into a spare fuse hole that is hot when the key is on, none of my spare fuse holes are hot! Spent two house trying to figure it out. Help please!
#2
You can actually go down to many auto parts stores and buy a add a fuse thinggy. (For lack of a better word) It allows you to keep the stock fuse at it's normal size and it has a wire coming off of it with a fuse to allow you to add another accessory.
Here is a link to what I am talking about Bussmann/ATM fuse tap converts one into two fusible circuits - 10 Amps maximum on added circuit (BP-HHH-RP) | Fuse and Accessories | AutoZone.com
Here is a link to what I am talking about Bussmann/ATM fuse tap converts one into two fusible circuits - 10 Amps maximum on added circuit (BP-HHH-RP) | Fuse and Accessories | AutoZone.com
#3
the raptor wiring should have its own fuse allready...you could just t-tap it onto a wire somewhere else that is key'd hot insead of doing it in the fuse box...that's how i wired my CB in
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
Gm3500
Chevy/GMC 6.2L and 6.5L
9
05-07-2015 11:01 AM