DIESEL BOMBERS Support List GET HELP NOW !!
 

seen this over on Oilburner's, figured it would be a good addition here, list everything pertinent to helping someone, dosent have to be exactly like mine but anything you can think of, list, so if someones broke down they can atleast contact one of us for help......

Logan Stanforth
Lakeland, Fl (i have several connections all over southern ohio though)
cell 24/7 937-402-8540

several parts stores and repair facilities very near, injection shop at the end of my street
best friend can rebuild any injection pump, he does it for a living
i have an associates degree in high performance motorsports
i know 12 valve cummins fairly well
i/we can fix about anything
plenty of tools
i have internet access 24/7
spare bedroom
plenty of room for a trailer
friend has welder, generator, compressor on his service truck, will soon have it on the 450
within 100 miles i can almost guarantee i can come get you
advanced gas engine knowledge

1991 F450 7.3 IDI toolbox body
1989 F350 460 gas w/ flatbed w/ GN
1986 2500 Suburban 6.2
1990 D250 5.9 cummins (dead in north carolina sadly)
possible access to trailer if need be

Jamie Robinson
Lubbock, Texas

Cell (325)665-0080

I Know a little about diesels.

I can get a trailer and get you to a good shop or dealership or help anyway I can.

Jamie

I will edit my post here once I get moving, but currently:

Jeremy
Manly, IA

Cell (949)-315-5876

I have general knowledge and have some tools carried with me at all times in truck.... That and I am good at drinking beer :D

I am just living in Northern IA at the moment, and in within a month am planning on moving back to my home of southern CA.

John , Ham Lake , MN
cell 651-402-6482
available for emergency help for fuel if many miles , or hire for projects .
about 25 yrs in repair bis. , but had a lot of tools stolen so available depending on tools needed , have unheated garage .

JR Spence,
Port Crane, NY (very close to PA via I-81, I-88, I-86 (NY17))
Home 607-648-8254 (ANYTIME day or night)


Plenty of parts shops, lighted garage, trailer, possible horse trailer, room for livestock, plenty of tools, plenty of Gas and diesel knowledge, OBDII scanner. Local Diesel shops, and performance shops.

Im not afraid to travel to help out.

:c:

lol i'm in maine.. who in their right mind would drive up this way??

well if you do...
and you get broke down or what ever..
we own Page's towing and septic....
if yer broke we can move yah.
(207) 633-3282

if yer pooper is clogged up we can pump that too lol

Bowling Green, KY here.

specialize in 12v's, but ISB's are no mystery either, as we have an 'o1 as well. Sorry, haven't spent the dough on a CR yet, so I don't know much about them.

We're in the Beech Bend RV park just next door to the Beech Bend Raceway...yeehaw! I tote around a large enclosed trailer that houses a fairly complete tool inventory and shop. If you're in the area and need help holler....and if you visit the dragstrip and find yourself in need of a special tool, some welding etc let me know. If you happen to break down out on the road, I've been known to hitch up the shop trailer and help folks out.

(850) 625-7232 This is a Florida Area code cell, soon to change to a KY area code (270)

Nextel 186*314695*2

Chris

Darian, Ballston Spa, NY

i got some tools and a garage to work on stuff in and knowlege about diesels

cell (518)-879-9023
nextel dc 178*21*13720

I'm In Blowing Rock , NC in the very western corner! I Own a full service shop, Willing to help anyone I can!

Numbers

828-266-9077 Shop
828-773-6625 Cell

Pat McCartin
404-513-4414
Inland Marine Diesel
Buford, Ga (Near I-85 & I-985)
shop space, tools, trailer....a little diesel knowledge, good contacts with Cummins, Dodge, many local parts stores.
Weak on D-max and PowerStroke but can help with logistics.

HOW FAR FROM MT. AIRY????? DO YOU REBUILD INJECTION PUMPS????

We're about 2 hours out from Mt Airy! At this time we dont do any pump or major head work! Let me know if anyone needs a pump, I'll give a GREAT Deal on VP-44's or whatever they need!

Logan needs a VE . . . .

Well, anyone in trouble in the Sacramento Area can call me.

Jason
Cell - 916-215-0036
Shop ( I never leave!:sen:) - 916-386-2855 / 800-450-7036

We have a full setup of tools and such. Pretty much any Diesel Pickup. If you need to be towed we have our ways of getting you off the highway either to a safe place or back here to the shop. No portable compressor, but other than that we can come out to the field to help with diagnosis and repair.

NO ONE IN ALL OF NORTH CAROLINA REBUILDS PUMPS BUT ONE GUY!!!!!!!!!!!!!!! just messin with ya, i could only find one shop that rebuilds them the whole time i was there.....and yes, i need a VE

I've got a pump shop that i buy dirrectly from down in greensboro that delivers every tuesday!

Bill Kelsey
oxford NY
cell 607-316-0846

have heated garage, fridge with beer, tools, nude posters and basic diesel knowledge and good mechanical/electrical knowledge

East coast Nc
Shane Broadway
910-376-0438
Weather you are dead on the water witha boat problem or dead on the road or just need help with anything diesel parts install or outboard engine repair. Let me know.
If it a tranny problem well I can take it out and put it in thats about it for that.
But I have access or have almost any tool you need. :c:

---AutoMerged DoublePost---

Also if you have mechanical questions about outboard engine I know some one that knows what you want to know. ME I am a evinrude guy. I love etecs

Kent Wheelis
Central Texas
210-313-7887
just about whatever you could possibly need from tools to tires for your truck, multiple places to work, plenty of friends to get second opinions from.

Bobby Swords
Gloucester, VA (I can get to you anywhere on the eastern side of Virginia in a coulpe hours)

Have trailer, tools, and LOTS of close friends that are willing to help also!

804-512-844one

Joe
Marshfield, WI
(715) 305-6007
little diesel knowledge, plenty of gas knowledge. friends with the local dodge dealer, sources at one local diesel repair shop and my cousin owns the other one, willing to travel as far as MN border and IL border....if your to the east ill try my best but no guarantees.

i'll do what i can to get ya the hell outa wisconsin i dont even wanna be here no reason you should be stuck here too

Extra room, food, beer, tools, garage, and theres a gentlemans club (thats not so good but there are women there) about 1 mile away

Have to update, I know my top right post info says it, though I am back in Southern CA. The small town I am located in is actually an unincorporated city within Dana Point, I am pretty much located 2 blocks off of interstate 5, about 6 miles north of MCB Camp Pendelton.

Chris Luttrell
Fayetteville AR
cell 479-236-6530 On 24/7

I have a few trailers And a heated shop with a few air tools all kinds of hand tools as well as a grinder and a few other toys. I also have a great recover tool(7400 John Deere) If your stuck somewhere. It also makes a good jack.

Nate
419-351-9475
Holland Ohio (Toledo Area) have trailer that can fit a reg cab on if you need a tow, know some people that know alot more then I do about these trucks, but I have a bit of 12V knoledge, a good dodge trans builder, plenty of tools and welding equipment, beer, hay for livestock and a spot for a camper for a few days if need be

Mike shingletown ca east of redding cell 661-330-8068
have my 01 with a gooseneck hitch 3horse slant load aaaplus also have my dads 04 and a neighbor with a backhoe
have many tools between myself my dad and my grandpa all live within 5 min of each other so we can help get you moving and have spare room also a mini motorhome and a fullsize motor home to stay in if needed. ohh and we build cabinets too..

Jimmy central PA near PA turnpike
7177297100
Hauling and repair of any kind
On site and full shop

Chris Kelley
(276) 233-0097
Galax, Va. (( about 12 miles from Exit 14 on I-77 in Virginia))

I have a great hauling truck, and a trailer that will haul ANY diesel truck, minus trailer.
I also know a lot of people who own shops in the area, (Galax VA, Sparta NC, Yadkinville NC, etc)
As well as friends at the largest local Chevy dealer, but the dealership has a all, a Chevy/ GM dealership, Ford, and Dodge.

As well as the desire to help anyone that I can.
call anytime and I will help if I can.:rocking:

Blake Hawes
Sandusky, OH
(419) 656-7740 Cell
(24/7) If your stuck or broke down, don't hesitate to call. Will help the best I can, at the very lest, will bring ya beer.

Don't have a lot of diesel knowledge (Am Learning),
Use to run a shop in Westlake, LA.
Have hand tools, power tools, some air tools, small portable compressor,
Can get a hold of a welder.
I have a small unheated garage w/beer, but have access to a big three bay pole barn w/heat (Just have to start a fire lol)
Shooting Range on-site
I don't know that many people up here personal, but can get just about anything.
Several parts stores and repair facilities very near
Live right in town, so everything is close.
Big lot across the street, for anything you can pull
Have internet access 24/7
We got Cedar Point (for those that don't know Cedar Point Amusement Park, The Roller Coaster Capital of the World!)

Shawn Tracy
817-205-8525 (cell 24/7)
Whitesboro, TX (about 70 miles north of Dallas)

3000' shop with 2 bays and sleeping space
All tools needed to do about anything
Welder and torch
Lots of beer :c:
30' GearBox toy hauler - sleeps 10 comfortably

Never had to learn to work on diesels but can do about anything to a gasser
Very willing to help out in any way I can

New Era Diesel Performance
973 Alfred St.
Zanesville, Ohio
740-819-0457


We pretty much do it all. Have full shop. Even do full class 8 work.

William Kruger
Baker, MT
406-852-3 ate to four (call, text)
email: bigskyram at gmail .com (phone notifies me)

Got tools and a code scanner. Two parts stores and a Cummins shop (limited Dodge parts though) in town, Carquest is open till 4 on Saturday. Can travel with needed parts and supplies, either direction.

Matt McCall

Western and Central NY, Southern Ontario

Plenty of tools, and knowledge on how to fix 12V and 24V trucks, as well as most non-powertrain parts on all other trucks. No shop, but have an open driveway. Have a welder, compressor, and plenty of other tools.

Give me a call if there's trouble, if I can't fix it, I can get you a tow to someone who can. 716-903-1321

update my stuff here for ya'll......

Logan Stanforth
Lakeland, Fl (i have several connections all over southern ohio also)
if someone can get ahold of me on here i can dispatch my dad or brother out to pick you up or help.....

several parts stores and repair facilities very near.
injection shop at the end of my street.
i have an associates degree in high performance motorsports.
know diesels very well, i also know heavy engines well too.
i/we can fix about anything.
plenty of tools.
spare bedroom.
plenty of room for a trailer(s).
possible access to welder and torch.
within 100 miles we can almost guarantee that we can help you out.
advanced gas engine knowledge.

1993 D350 cummins dually
1993 F350 460 dually
1977 D350 440 dually
1990 D250 cummins SRW

30 foot tri-axle gooseneck
18 foot tandem bumper pull
2 wheel car dolly

Ryan O'
Surprise AZ (Northwest Phoenix but I'm up for a drive)for this year, but I can get you help in Livingston Montana too.
Cell 406 223 6198
Leave a message or text me I never answer a number I don't know.

I'm pretty good with diesels and have some parts laying around. Obviously I've got some tools. I'm always willing to lend a hand. Don't have a garage right now but its warm down here. I can also usually get the late night parts hookup in MT. I don't have a life so hit me up if you need some help. If you can text thats probably the quickest way to get a hold of me, if not call and leave a message and I'll probably check right after you leave it.
Can also email me:
ryan@oneillindustries.com

cody
Vernal Ut
(801)831-0391 or (435)219-0636

Diesel mechanic i know class 8 s real good
and my cummins, some ford not much on the dmax, but have and can find my way around,I got a garage, bed, some cold beer and other hard drinks we can fix it. And the old ladie will cook:5:

Rob deRoziere
Rotterdam NY Close To Albany Schenectady
(518) 361-9905 cell 24/7
Some tools some diesel knowledge
Used to do Road Side Service and can alwats bring mabey a tire or fuel or whatever:pals:

Cameron
Umatilla OR
541-720-8006 24/7

Full shop/tools, I run Freightliner in Hermiston OR. for all unknowing--EASTERN OREGON

Tools, Access to trailer if need towing, Spare bed, camp trailer, Parts stores around, 30 min from cat, cummins, have lots of truck parts available, willing to help any way i can.:rocking:

Corey Zak
267 371 9109
Sellersville PA
(45 mins north of philly, 20 mins from jersey, 10 mins from northeast extention of pa turnpike)

full access to my shop, loaded service truck to roll in. know all three brands well and if i dont know it i know who to call.

lots of parts shops, junk yards, and stealerships around.

Stockdale Texas, about 40 miles east of san antonio. Know a good bit about 2nd gens, enough about 1st and 3rd to help some. Access to a shop with good tools. Know lots of people than can find parts quick. Parts manager at the local dealer is a good personal friend, can get parts when theyre closed during an emergency. You can call or text 24/7, i work shift work so im used to not getting sleep. If i dont answer leave a message, ill get back to you real quick. Texting is the easiest way to get ahold of me

830-391-4799

Brian Barcroft
Mansfield, Oh (halfway between Cleveland and Columbus along I-71)
419-571-7895

Got semi-heated 3 1/2 stall garage with basic hand tools, air tools, shop air, engine hoist, welder, cutting torch, sawz-all and duct tape (:U:). Spare bedroom that sleeps 2 and a 5th wheel RV that sleeps 6. Several major parts stores, resturants and basic repair shops within 5 miles and one hell of a good diesel machanic 12 miles north-west of here.

Kyle Firestone

buffalo springs, Pa

Cell #1717-222-0681

D.C.# 196*18694*49

Don't know a whole lot, BUT i am real good at holdin a flashlight.... I can also get you anyplace you want to go, access to flat bed trailers, and enclosed trailers. i know lots of local shops, that are great. i have easy access to I-81, I-78, I-83, and the PA turn-pike, and great knowlege of all major highways in central, north-east, and south-east pa. if you happen to be haulin a house, i can definally fix that for ya:hammer: