heater core
#2
take your heater hoses off where they go through the cab put 1/2 pipe between them with hose clamps and run it that way until you get your heater core replaced
#8
I just had the same problem on the '02 of mine. All I did was get about a foot of 5/8" heater hose from Napa ($1.15) and two hose clamps. Removed the soft lines coming out of the firewall on the engine side and installed the foot long piece of hose to bypass the heater core completely. Don't have any pics as the truck is out of town this week, but if you look under the hood, it will be relatively obvious what to do. Will work until fall I suppose. I am not looking forward to replacing the heater core...
Thread
Thread Starter
Forum
Replies
Last Post
ramrunner01
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
03-19-2015 11:03 PM