One morning about a month ago I hit a bump and my speedo quit working right. It will bounce around up to about 30 and won't go over. I had another post on here and found that my speed sensor in the axle was chipped so I ordered a new one. Just put it in and it is still doing the same thing so that wasn't the problem. Truck still runs and drives great besides that.

 

you might try these guys and see if it will help Speedometer Repair and Odometer Repairs at Low Prices! Instrument Cluster Repair!

 

So I take it yall think it's my speedo I was kinda wondering that.

 

The place arizonaredneck gave the link to is in tampa florida. I have been in their shop and had them repair our speedometer. They are good guys to deal with.

 

ok I'll look them up I'm about 2k miles but thank god for mail

---AutoMerged DoublePost---

Also what years are the same for dashes I found one pretty cheap local out of an 02. It looks the same

 

Most junkyards have interchange books that tell what parts are interchangeable from year to year. Check with junkyards to find one with the interchange and they can tell you if the 02 dash is right.

 

do you have any other lights on your dash?also try,wiggle abs module plug and see if that happens.i had simular problem on my 02 gasser and was loose conection on module.same thing hit the bump and speedo goes out but sometimes would come back on when hit bump again.wont hurt to try!

 

Ya all lights work on dash tach works gauges work speedo just kinda works only goes to around 30 and is kind of bouncy. I will give it a wiggle tomorrow I tried kicking smacking stuff earlier but nothing happened. I'm just running off the tach right now.

 

So it still doesn't work I found a complete instrument cluster I'm gonna try its less than 20 bucks so we'll see. I should have it in a week.