Does anybody have the part number for that little jewel?

Its the brass fitting in the front of the tranny to the cooler.

nobody has anything close around these parts

Thanks in advance

 

1/2" swedglock fitting work just fine for the tubing..

 

1/2 inch swedglock to 1/4 inch pipe?

 

yes...............Swdgelock makes 1/2 tube to 1/4 NPT pipe threat (national Pipe Thread)

is this a "T" or what???

 

no this is just the stock brass fitting that goes into the transmission and connects to the tubing that runs up to the cooler

---AutoMerged DoublePost---



this one

 

Oh OK.....so a 1/4" npt threads right into the tranny (NPT) and then 1/2" tube from there??

if this is the case than go get a swedglelock fitting and be done with it man

 

I think its a 1/2 inch tube.....There is no room to cut the tube and put on a new fitting...the brass fitting has a female threads that are all messed up that the tubes fitting is supposed to screw into.

any idea how much pressure is in the line when running?

my lines are all bent up after a joyus weekend of replacing the tranny

 

just get some new tubing and a bender and go all new from point A to point B

 

You should be able to go to a Napa auto parts or sometimes other auto parts store and get a fitting. It is 1/2 inch inverted flair to 1/4 pipe. Any hydraulic hose shop would also have the fitting.

 

If you need, I have extra case fittings. Call me.