help help help!!!!
#1
help help help!!!!
Ok so im some what new to the site but i need a little help! me and my buddy did a turbo and injector nozzels on his 08 lmm d max.. hes runing a 68mm cheta turbo and honed out nozzles to 60 %... we got the truck all back togeather went to fire her up and had some problems.. first problem is he is only building about 34 psi at the fuel rail at start up when he normally builds about 1300.. so after finally getting it fired it runs real rough and blows alot of whitish gray smoke.. i mean like alot of smoke... a couple of people said it could be something wrong with the injectors but i just want a couple more opinions...any info will help thanks alot!!!
#3
yes he has an air dog fuel system.
---AutoMerged DoublePost---
yes he is runing an air dog fuel system
---AutoMerged DoublePost---
yes he is runing an air dog fuel system
Last edited by rlncoal57; 09-13-2009 at 08:25 PM. Reason: Automerged Doublepost
#5
No fuel in the oil and the smoke doesen burn ur eyes and it doesent smell like raw fuel either Im puzzled
---AutoMerged DoublePost---
No fuel in the oil and the smoke doesent burn you eyes or smell like raw fuell it does have a code that pops up po341 wich is a cam sensor
---AutoMerged DoublePost---
No fuel in the oil and the smoke doesent burn you eyes or smell like raw fuell it does have a code that pops up po341 wich is a cam sensor
Last edited by rlncoal57; 09-14-2009 at 05:20 PM. Reason: Automerged Doublepost
#8
we had it runing forabout 5 minuts and bled all the air out of the ines so we kinda rulled that out... when u go to idel it up it basically falls on its face n rolles even more smoke it also backfired a couple times out of his cold air intake witha huge plume of thi whitish gray smoke??