wont start after changin the fuel filter. HELP
#1
wont start after changin the fuel filter. HELP
i changed the fuel filter then went to start it and bumped the starter and it ran for a bout 30 seconds. now it wont crank. i have tried bumpin the starter again n just turns over. whats going on here?
---AutoMerged DoublePost---
its an 02 24 valve auto. fass 150 pump
---AutoMerged DoublePost---
its an 02 24 valve auto. fass 150 pump
Last edited by Dan.tha.Cummins.man; 03-04-2009 at 03:20 PM. Reason: Automerged Doublepost
#4
If you have air trapped in the injection system which I'm sure you do. Your gonna have to loosen injector lines #1 and #3 and start crankin. Fuel will be comin outa the lines as you do this and once it starts, it'll run ruff and just tighten them back up your done. Lots easier with 2 people though one cranking and one under the hood.
The following users liked this post:
Dan.tha.Cummins.man (03-04-2009)
Thread
Thread Starter
Forum
Replies
Last Post
Cavnar
Diesel In Distress - Support Ticket
3
09-09-2015 07:18 PM
RatsMC
Chevy/GMC 6.2L and 6.5L
19
05-04-2015 05:25 PM
Collin Dow
24 Valve 2nd Gen Dodge Cummins 98.5-02
4
02-21-2015 08:18 PM