carrier bearing gone
#1
carrier bearing gone
carrier bearing is gon (shot i mean bad slapin against fuel tank bad) the pro is dodge house i closed and probaly will have to order one does any on know if any other parts stores will cary one, i got one but dont know if its the right one some off brand i need to leave friday to go to wisconsin and these are supose to be pressed on right the other 3 ive replaced we put on with a 2to 3 ruducer nipple(didnt hurt the bearing im for sur) and we melted the old ones of with a torch any other i deas to do this will help i have acess to a press but i would suk to have to go up there and use it
Thanks
TANNER
oh and i already romoved the drive line how bad would it be to drive `10 miles in front weel drive
Thanks
TANNER
oh and i already romoved the drive line how bad would it be to drive `10 miles in front weel drive
Last edited by TEXASPOWER; 04-24-2007 at 07:26 PM. Reason: forgot
#2
you can drive on the front driveline no problem..........I would make DC give ya one from a loaner truck for now
#5
ya it is they wont fix anything unless i need it real bad theve seen me pull a sled to many times and reflashed the computer cuase of so many codes there on probation right now from dc
#6
get the bearing number from the outer race and get one in yer hand.yer also gonna need a press maybe
I would just use the gas ax to remove the old one
I do alot of interferance bearing jobs at work and my prefered method of installation is to preheat them on a bearing heater to about 210*f and slide em righ on......dont go past 210 though
I would just use the gas ax to remove the old one
I do alot of interferance bearing jobs at work and my prefered method of installation is to preheat them on a bearing heater to about 210*f and slide em righ on......dont go past 210 though
#8
Sounds like this one is done so I'm gonna close it out. If you still need anymore help on it Texaspower you can open it back up with the thread tools option at the top. Congrats and hope your trip is a safe one.
#9
one other lil tip .IF you hafta beat any interference fit bearing on you must only beat on the inner race....this will keep bernelling away from the ***** and outer race somewhat
Thread
Thread Starter
Forum
Replies
Last Post
Willey878
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
06-01-2015 02:26 PM