Ford 6.0L crank, but no start
#1
11-03-2015, 11:55 PM
Join Date: Aug 2015
Location: New Hampshire
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
Ford 6.0L crank, but no start
Hey guys,
I was driving on the highway when I noticed a bad vibration, which lead to a loss of engine power and eventually the engine completely shut off in the middle of the highway. I pulled it off into the break down lane, let it sit for a few minutes and tried to start it again. Nothing. The starter kept cranking but the engine wouldnt turn over.
I'm thinking its a failed FICM or ICP but any other suggestions or recommendations would be appreciated!
I was driving on the highway when I noticed a bad vibration, which lead to a loss of engine power and eventually the engine completely shut off in the middle of the highway. I pulled it off into the break down lane, let it sit for a few minutes and tried to start it again. Nothing. The starter kept cranking but the engine wouldnt turn over.
I'm thinking its a failed FICM or ICP but any other suggestions or recommendations would be appreciated!
#2
11-04-2015, 10:49 AM
2006 ford E-450 super duty V8 6.0got engine oil pressure at the turbo inlet line , replaced new high pressure pump and there is no oil at all in the high pressure pump
Last edited by carlos valente; 11-04-2015 at 10:56 AM.
