does anyone have any idea on how to get a 12 valve unceased

 

depends on what caused it, u can try spining it backwards, u might5 have to loosen all the main bolts if it spun a crank shaft bearing, if it filled the piston full of coolant from a crack cylinder or a head gasket failure, u would have to pull an injector. it all depends on what caused it. good luck

 

well it was took out of a wrecked truck and they pulled it out and it seat all winter and then i bought it from them cause it ceased up just by seating

 

Welcome to db
Good luck with the engine, try posting in the 12V section

 

If it has ceased do to weather it might have some rust between the piston and cyclinder wall. I would tear it down and do at complete rebuild.

 

pull the head and use wd40 or other pentrating oil to get the rust freed up. had a 22r that did the same thing. i just pulled the spark plugs and filled the cylinders with wd40 and let it sit for a few days. then used a breaker bar to get it turning and then put 10k on the engine befor it lost a rod. it was in my 82 rock crawler. good luck.

 

x2 I would also recommend this. Best way to ensure that the engine will run smoothly.

 

Hope you get your issues resolved!