Diesel Bombers Introduction

We pride ourselves on being a welcoming community we are happy to see you here and we want to get you talking to us, start here by telling us about you and your diesel.
*PLEASE DO NOT POST TECHNICAL QUESTIONS IN THIS SECTION*

Up-N-Over From South Carolina

Thread Tools
 
Search this Thread
 
Old Apr 14, 2008 | 07:55 AM
  #1  
up-n-over's Avatar
Thread Starter
|
Diesel Fan
Joined: Apr 2008
Posts: 15
Likes: 1
From: Lake Wylie, SC
Default Up-N-Over From South Carolina

Hi All,

It was suggested that maybe I should drop in here and introduce myself. My name is Robert. I run the engineering department for a company that produces gas control systems for furnaces, boilers, water heaters and fireplaces, and also makes CNG and Propane conversion systems for automobiles. I've been married to my one and only wife for almost 22 years and we have a 17 year old daughter and a 14 year old son. I'm 43 years old and I've been driving diesel pickups now for about ten years. I am somewhat of a diesel fanatic.

I started off with a '99 Ford Super Duty with the 7.3 PSd and then moved to an '03 Super Duty with the 6.0PSD. I now have a 2006 Silverado with the Duramax LBZ/Allison combo(Long story). I never thought that I would say it, but I am happier with my Chevrolet than I ever was with my Fords.

I have just purchased a Cummins 4BTA turbo diesel engine for my rock buggy project. Following are the specs for my COYOMOG truggy:
  • 1980 Toyota Pickup with tube frame and exoskeleton
  • Cummins 4BTA turbo diesel engine
  • 700R4 automatic overdrive transmission (heavily modified to survive the torque)
  • STaK 3-speed transfer case with 5.44:1, 3.05:1, and 1:1 gear ratios
  • Unimog 416 disc brake portal axles with 6.52:1 gears and factory air lockers
  • 3-link front suspension with fully hydraulic steering
  • 4-link rear suspension
  • 46-19.50X20 Mickey Thompson Baja Claw bias ply tires
  • The minimum clearance under the axles will be 21". The minimum clearance under the transfer case will be 30", and the maximum height of the vehicle will be 84".

The frame and exo are built and I am now in parts gathering mode. I will have all of the main parts by the end of April and should have a drivable rig by September.
 
Reply
Old Apr 14, 2008 | 08:04 AM
  #2  
GRI's Avatar
GRI
Diesel Bomber
Joined: Mar 2007
Posts: 2,958
Likes: 135
From: Mother Nature, New
Default

welcome!
 
Reply
Old Apr 14, 2008 | 08:22 AM
  #3  
redstroker_2002's Avatar
Diesel Fan
Joined: Apr 2008
Posts: 68
Likes: 3
From: Gibbon, Nebraska
Default

Welcome the site!!!
 
Reply
Old Apr 14, 2008 | 09:39 AM
  #4  
LeadfootDuramax's Avatar
Diesel Wrench
Joined: Dec 2007
Posts: 971
Likes: 41
From: Houston, Tx
Default

Welcome!!
 
Reply
Old Apr 14, 2008 | 03:34 PM
  #5  
Diesel Dawgs Performance's Avatar
Joined: Mar 2007
Posts: 14,546
Likes: 843
From: Western NC
Default

Welcome to Diesel Bombers!!!!!
 
Reply
Old Apr 14, 2008 | 03:46 PM
  #6  
xzaq103's Avatar
FormerVendor
Joined: Jun 2007
Posts: 3,196
Likes: 136
From: Fayetteville AR
Default

 
Reply
Old Apr 14, 2008 | 04:19 PM
  #7  
RTL Garage's Avatar
BOMBARDIER
Joined: Feb 2008
Posts: 1,759
Likes: 10
Default

Welcome To DB!
 
Reply
Old Apr 14, 2008 | 04:38 PM
  #8  
Redpatcher0481's Avatar
Diesel Bomber
Joined: Feb 2008
Posts: 1,148
Likes: 142
From: Magnolia, TX
Default

 
Reply
Old Apr 14, 2008 | 04:42 PM
  #9  
TCU Fan's Avatar
Aaron
Joined: Apr 2007
Posts: 6,042
Likes: 406
From: nunya
Default

Welcome aboard.
 
Reply
Old Apr 14, 2008 | 05:37 PM
  #10  
BigGreenMonster's Avatar
Diesel Fan
Joined: Apr 2008
Posts: 63
Likes: 3
From: S.C.
Default

nice specs... i would like to check that out when it is done.
 
Reply



All times are GMT -5. The time now is 09:39 PM.