55 Chevy Duramax transplant- Need help!
#1
55 Chevy Duramax transplant- Need help!
hi im new here. want to pick all of your brains. i built a prostreet 55 chevy pick-up and decided to put a duramax in it. i bought a 08 lmm with allison brand new it was for a box truck or something so the oil pan is backwards,fuel filter on driverside,and trans mount is on bell housing. i want to remove all egr, any ideas? what to do with throttle body manifold? aftermarket ecu that gets rid of emissions and adds boost? Aftermarket TCU for better shifts? what do i for intercooler,transcooler, and radiator. if any one can help please let me know. and what do i shift tranny with? push button or linkage? After removing all the EGR do they make an aftermarket throttle body plenum? I plan on putting headers on.
#2
#3
#4
#6
#7
standalone ecm and tcm and efi live is all that you would need, theres tons of tuner out there. PPE can give you all the wiring you need but it aint cheap, atomized engineering is also a good company that does standalone pcm's and wiring.
destroked d com does make some harnesses to drop in an alison tranny into anything and have a tcm.
destroked d com does make some harnesses to drop in an alison tranny into anything and have a tcm.
The following users liked this post:
55chevydmax (01-25-2010)
#8
i have both factory harnesses. wish i had diagram as to what things r called on a duramax and a wiring diagram would help.
---AutoMerged DoublePost---
somebody said that since my motor is for kike a kodiak that the manifolds on it flow better? so i can probably take off the up pipe to egr cooler thing and just tig weld a patch on it. turbo down tube doesn't appear to b crunched in the middle like a pick-up diesel? can i get a new intake tube where the egr motor or whatever it is bolts to?
---AutoMerged DoublePost---
somebody said that since my motor is for kike a kodiak that the manifolds on it flow better? so i can probably take off the up pipe to egr cooler thing and just tig weld a patch on it. turbo down tube doesn't appear to b crunched in the middle like a pick-up diesel? can i get a new intake tube where the egr motor or whatever it is bolts to?
Last edited by 55chevydmax; 01-25-2010 at 04:37 PM. Reason: Automerged Doublepost
#9
#10