help help help lmm problems
#1
help help help lmm problems
i have a 2008 duramax that i have been working on for 20 hours trying to figure it out. the problem is that numbers 4 7 8 injectors arnt firing i have replaced thows injectors and still no luck i traced and checked all the wiring and found that it tests all good i replaced the ecm and had it reflashed still no love on thows injectors i tested the new injectors and they work on another truck also programed the injector flow rates into the computer no luck the injectors still dont fire i am about ready to have a bomb fire with this truck and roast marsh mellows over it but before that happens does some one have any ideas on what else might cause thows injectors not to fire and i am getting fuel to the injectors as well and the injectors that i installed are brand new right from bosh not remanufactured any help please or the next post might be a pic of me roasting marsh mellows thanks for any help
#2
roasting? by chance did you do a drag test on the pins in the wiring and make sure they are making good contact? or a voltage drop readings at the injectors? I know this is an old post but no one helped and I was curious.
---AutoMerged DoublePost---
almost 200 views and not one post.
---AutoMerged DoublePost---
almost 200 views and not one post.
Last edited by skuzlb7; 07-30-2013 at 11:05 PM. Reason: Automerged Doublepost
Thread
Thread Starter
Forum
Replies
Last Post
Ohiocummins99
24 Valve 2nd Gen Dodge Cummins 98.5-02
1
07-08-2015 07:30 AM
Murdock
Chevy/GMC Truck and Duramax Turbo Diesel Forum
3
04-12-2015 06:16 PM
Renowest48
Diesel In Distress - Support Ticket
0
12-14-2014 08:36 PM