Tranny Trouble Codes
#2
P0777 Clutch Pressure Control (PC) Solenoid 2 - Stuck On
The code means the Alli was too slow releasing the off going clutch while the oncoming clutch was applying. It tied up in two gears at once.
P0700 is the only trans related code the ECM will tell you. When the TCM detects a problem it sets a code and sets the P0700 code in the ECM which tells it to turn on the CEL. The P0700 tells you that you need to scan the TCM for codes which some scan tools will not do
The code means the Alli was too slow releasing the off going clutch while the oncoming clutch was applying. It tied up in two gears at once.
P0700 is the only trans related code the ECM will tell you. When the TCM detects a problem it sets a code and sets the P0700 code in the ECM which tells it to turn on the CEL. The P0700 tells you that you need to scan the TCM for codes which some scan tools will not do
#5
#6
I need help with there two codes. P0089 started about two months ago and I noticed a slight surge in the ideling. The P0380 started recently started. Please can someone help??
My Mechanic up and moved so I'm out of luck and getting ready to move bak to Texas and tow a trailer full of tools.
My Mechanic up and moved so I'm out of luck and getting ready to move bak to Texas and tow a trailer full of tools.
Thread
Thread Starter
Forum
Replies
Last Post
Daniel Leipart
Diesel In Distress - Support Ticket
2
06-28-2015 02:42 PM
DSM1988
5.9 Liter CR Dodge Cummins 03-07
3
01-18-2015 11:11 AM