DURAMAX PROBLEM
#1
DURAMAX PROBLEM
SO HERES THE DEAL..RECENTLY REPLACED INJECTORS IN MY 2002 DURAMX. STARTED AND RAN GREAT THEN AFTER A SHORT DRIVE THE THING WONT START WITHOUT FLUID. ANY IDEAS ON WHAT COULD BE CAUSING THIS..RUNS GREAT AFTER THE ETHER SHOT BUT DON'T WANT TO CONTINUE THIS..IS THERE A FUSE OR A FUSEABLE LINK THAT COULD B BLOWN?
#3
#5
#7
Im having the same problem, replaced the injectors and cp3 pump. if the truck sits for a bit it looses prime and i would hit the primer a few times it would be fine. now it will run for a few mins and die. I was also wondering what the problem could be? I also did the rebuild kit for the filter housing still loosing prime
#8
so after more hair pulling thought it might be a bad cdu. i do have power in but nothing at the injectors.is it possible to read the voltage at the injector? if the cdu went bad would it show up as the original problem of one injector going bad? and what would be the best way of checking this out.
#9
Im having the same problem, replaced the injectors and cp3 pump. if the truck sits for a bit it looses prime and i would hit the primer a few times it would be fine. now it will run for a few mins and die. I was also wondering what the problem could be? I also did the rebuild kit for the filter housing still loosing prime
Sent from my DROIDX using Tapatalk 2
#10