Chevy/GMC 6.2L and 6.5L Discussion of Chevy and GMC Trucks with 6.2L and 6.5L Diesel Engines

jake brake for 80s chevy military truck

Thread Tools
 
Search this Thread
 
  #1  
Old 07-19-2012, 02:59 PM
firstgenfreak93's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Jun 2012
Location: Indiana
Posts: 155
Likes: 0
Received 5 Likes on 5 Posts
Question jake brake for 80s chevy military truck

How hard is it to instal a jack brake in a 80s chevy military truck. How much will it cost. what will have to be done to make it work. Is it worth the time to install. Will it help stop a 30 to 40 ft goose neck easier with a load on the trailer. what will have to be done to the 6.2 detroit motor with a jake brake put in it.
 
  #2  
Old 07-19-2012, 04:38 PM
Mayhem's Avatar
Diesel Wrench
Join Date: Jun 2012
Location: Middle of nowhere Tn
Posts: 1,255
Received 128 Likes on 121 Posts
Default

Do you mean an exhaust brake? a jake brake use engine components that a 6.2 lacks and a exhaust brake on the same engine would be a bad idea due too the higher EGTs it would wear out the engine 100 times faster if its tow braking that you are concerned with a good brake controler and a good set of trailer brakes would out weigh the benifits of an exhaust brake.
 
  #3  
Old 07-19-2012, 05:18 PM
firstgenfreak93's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Jun 2012
Location: Indiana
Posts: 155
Likes: 0
Received 5 Likes on 5 Posts
Default

Thanks for the help i will not do that
 
  #4  
Old 07-20-2012, 12:24 AM
bassangler's Avatar
Newbie
Join Date: Jul 2012
Location: GA.
Posts: 8
Likes: 0
Received 0 Likes on 0 Posts
Default

X2 on that Mayham. these are pick up truck not 18wheeler with a detroit and yes they might be a detriot block and so forth . Still a GM product. LOL but yes don't waste your time or $$$$$ . use a good trailer brake and control. Thats what I do to tow my 2011 21ft ranger bass boat.
 
  #5  
Old 07-20-2012, 01:03 PM
firstgenfreak93's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Jun 2012
Location: Indiana
Posts: 155
Likes: 0
Received 5 Likes on 5 Posts
Default

Thanks for the help. Do you think the truck is capable of pulling a 30ft to 40ft goose neck with a load of 2 tractors on it. It will have a sidewinder turbo and 35in mud tires.I just want a tuff truck for hauling
 
  #6  
Old 07-21-2012, 02:58 PM
ts35222's Avatar
Diesel Fan
Join Date: Jul 2012
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

I have a m1008 n/a and it will pull about anything, it has 265/75 r16s the only thing I would be concerned about is trailer brakes.
 
  #7  
Old 07-22-2012, 01:13 PM
firstgenfreak93's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Jun 2012
Location: Indiana
Posts: 155
Likes: 0
Received 5 Likes on 5 Posts
Default

so how much have you pulled with your m1008
 
  #8  
Old 07-23-2012, 05:36 AM
Mayhem's Avatar
Diesel Wrench
Join Date: Jun 2012
Location: Middle of nowhere Tn
Posts: 1,255
Received 128 Likes on 121 Posts
Default

I have the M1009 Blazer the only thing I have hauled in it is ***
 
The following users liked this post:
jdozer (07-23-2012)
  #9  
Old 07-25-2012, 12:14 AM
ts35222's Avatar
Diesel Fan
Join Date: Jul 2012
Posts: 20
Likes: 0
Received 0 Likes on 0 Posts
Default

Its a farm truck so from using it to haul seed, to spray, to hauling skid loaders and tractors is what it hauls. In the fall it pulls 2 wagons out of the field loaded is about 30000 lbs with no pin weight. the rear brakes on these trucks are huge, so stopping power generally is pretty good(if they are adjusted properly and brake booster is good). the rear axle has a ride height sensor/valve which proportions the braking power of the rear axle, which when there is about 3500lbs in the back is pretty nice. The truck will handle quite a bit, just use caution when hauling unfamilliar loads.
 
  #10  
Old 07-31-2012, 09:14 PM
firstgenfreak93's Avatar
Diesel Enthusiast
Thread Starter
Join Date: Jun 2012
Location: Indiana
Posts: 155
Likes: 0
Received 5 Likes on 5 Posts
Default

sounds like a sweet truck and it is a chevy m1008. Do you think a chevy m1008 will perform with what i want to haul with it like a 30 to 40ft goose neck with tractors or mud trucks on the trailer.
 


Quick Reply: jake brake for 80s chevy military truck



All times are GMT -5. The time now is 03:52 PM.