ses issue
#1
ses issue
I have a 95 1 ton 6.5. I keep having problems with a dtc 35 and 36. It wouldnt bother me so much if it didnt kick the cruise off everytime the light came on.
I have put in a new lp, ops, new pickup in the tank, (thought the old one was plugged) replaced the ip with one that i know is good and not that old, new pmd, and tried a different pmd off a truck that does not trow a code.
I only get the ses light between 1500 and 3000 rpm. I comes on like clockwork. But once in a great while it will stay off for a little bit
I have put in a new lp, ops, new pickup in the tank, (thought the old one was plugged) replaced the ip with one that i know is good and not that old, new pmd, and tried a different pmd off a truck that does not trow a code.
I only get the ses light between 1500 and 3000 rpm. I comes on like clockwork. But once in a great while it will stay off for a little bit
#2
Try reseting the codes and some two stroke motor oil start with a 100to 1 ratio (gallons pumped X 128 divided by 100 that number will give you the ounces you will need then go to a 200 to 1 ratio the injector pumps do not like ULSD that they sell nowadays I do this in mine and it works for me
#4
#6
#7
#8
#9
#10