6.5l throttling up on its own

Reply Subscribe

Thread Tools

Search this Thread

Dec 12, 2010 | 07:46 PM

#11

Crazy

Diesel Bomber

Joined: Sep 2010

Posts: 1,322

Likes: 51

From: Reddick,Fl.

are you getting any codes the next time it don't after shut it do pour some water over the injector pump then try starting it and if you are getting codes clear them see if they come back

Dec 12, 2010 | 07:47 PM

#12

thor08

Thread Starter

Diesel Fan

Joined: Dec 2010

Posts: 41

Likes: 0

From: Roseville

No I'm not getting any codes that's what didn't make any since to me

Dec 12, 2010 | 07:50 PM

#13

Crazy

Diesel Bomber

Joined: Sep 2010

Posts: 1,322

Likes: 51

From: Reddick,Fl.

sounding more more like PMD from one thing you going to move it to front bumper on a heat sink it last lot longer they can't take the heat be under the hood

Dec 12, 2010 | 07:56 PM

#14

thor08

Thread Starter

Diesel Fan

Joined: Dec 2010

Posts: 41

Likes: 0

From: Roseville

Can you test a PMD to see if they are bad? Where do you buy them and how much do they run?

---AutoMerged DoublePost---

Is their a kit to get to put them on the bumper?

Last edited by thor08; Dec 12, 2010 at 07:56 PM. Reason: Automerged Doublepost

Dec 12, 2010 | 08:01 PM

#15

Crazy

Diesel Bomber

Joined: Sep 2010

Posts: 1,322

Likes: 51

From: Reddick,Fl.

here you not sure

PMD Isolators for GM 96-01 6.5T

Dec 12, 2010 | 08:14 PM

#16

thor08

Thread Starter

Diesel Fan

Joined: Dec 2010

Posts: 41

Likes: 0

From: Roseville

Ok thankyou. What is th is and why should I take it off? If I take off what will happen?

Dec 12, 2010 | 08:19 PM

#17

Crazy

Diesel Bomber

Joined: Sep 2010

Posts: 1,322

Likes: 51

From: Reddick,Fl.

if you talking about the PMD on pump now just leave it if going south on you why would want pull the intake off just to remove it when it bad just get new one with heat sink put in front bumper

Dec 12, 2010 | 08:21 PM

#18

thor08

Thread Starter

Diesel Fan

Joined: Dec 2010

Posts: 41

Likes: 0

From: Roseville

Oic. I have a aftermarket pmd mounted on the driver side of the intake.

Dec 12, 2010 | 08:34 PM

#19

Crazy

Diesel Bomber

Joined: Sep 2010

Posts: 1,322

Likes: 51

From: Reddick,Fl.

ok just make wire harness longer and put in front bumper and if you still have one on the injector pump try pluging back into it see how it runs or less you know it bad