Power Steering Pump
#1
#2
#3
#4
#5
#6
#7
You will need a powersteerring pump pulley puller, new pump, and about 4 hours of time to spare. Check the lines though. I say this because they have a tendancy to leak, when they leak they will cover the whole pump with fluid. If it is your front seal then you need a new pump. It has been a while since I replaced one. There should be two bolts I believe one is 5/8 and the other is 9/16. I believe the lines are a 5/8 as well. If I remember correctly the return line has a hose clamp on it. That is the one that is known to leak. Also if you replace the whole pump, don't forget to bleed it. You do this by jacking up the front end and turn the tires left and right. Keep checking your fluid level. Keep doing this as often until all the air is out.
#8
#9
I am sorry, but you asked for the info. You did not say you knew how to bleed the system. So I gave you that info as well. I have a changed a few on the 6.2L and 6.5L they are not that hard to do. But it is time consuming.
#10