Chevy/GMC 6.2L and 6.5L Discussion of Chevy and GMC Trucks with 6.2L and 6.5L Diesel Engines

Injector Pump Help

Thread Tools
 
Search this Thread
 
  #1  
Old 12-17-2009, 01:27 PM
dodgeflatbed's Avatar
Diesel Fan
Thread Starter
Join Date: Aug 2009
Location: Wilton
Posts: 78
Received 0 Likes on 0 Posts
Default Injector Pump Help

My buddy just bought a n '82, and i was wondering if there was any ay to turn up the injector pump like on the first gen dodges. i looked at it, but didnt want to mess with anything. thanks for the help
 
  #2  
Old 12-17-2009, 03:26 PM
Woody35's Avatar
Diesel Bomber
Join Date: May 2008
Location: PA
Posts: 2,856
Received 124 Likes on 117 Posts
Default

There's a 5/32" allen under the fuel stop sol. & cover, but is very risky to do. This engine can "runaway" if you're not careful. You have to remove the little linkage pieces inside the bowl. I think there's a spring, a small tin-like lever for the shutoff assembly, and the throttle/fuel control sliding plate. There's also a side access cover to get to the adjustment without having to disable the fuel shutoff and remove accelerator sliding pieces and springs. After you take off either cover (and/or the pieces inside) you'll notice a small hole, that's where the 5/32" allen goes. Sometimes it needs to be lined up by rotating the engine. Disable the glowplugs before doing this part! If you slowly rotate it by the alt. you'll see it come into sight. Now turn the allen about 1/4 turn clockwise, less on non-turbo and reassemble it all
 
  #3  
Old 02-11-2010, 08:58 PM
danielfoxracing's Avatar
Diesel Fan
Join Date: Jan 2010
Location: northern indiana
Posts: 33
Received 0 Likes on 0 Posts
Default

1/4 turn thats it trust me
 




All times are GMT -5. The time now is 01:54 AM.