cranks but no fire
#1
cranks but no fire
howdy, had enough of trial and error and new to the forum thing. got a 96 2500 6.5 300000 k on her, couple weeks ago the starter started giving me a fuss so i parked the truck till i had time to deal with it. It ran, started and worked good up until then. in the week before i got around to it the weather decided to go to ****(-30 for a week straight), so i slapped in a new starter and turned the key, cranks great but does not even try to fire. instantly knew its a fuel issue so checked filter, its decent. bypassed filter to see if worked, nothing. Injector lines off all cylinders in firing order, just a bit of fuel through each when cranking. opened water drain and cranked, while lift pump jumped and my shop vac rigged up to dump port, yeah i know. hoping its not the IP, guessing it could be electrical? ive got the red *** something fierce, anybody had similar problems or got any insight?
#2
howdy, had enough of trial and error and new to the forum thing. got a 96 2500 6.5 300000 k on her, couple weeks ago the starter started giving me a fuss so i parked the truck till i had time to deal with it. It ran, started and worked good up until then. in the week before i got around to it the weather decided to go to ****(-30 for a week straight), so i slapped in a new starter and turned the key, cranks great but does not even try to fire. instantly knew its a fuel issue so checked filter, its decent. bypassed filter to see if worked, nothing. Injector lines off all cylinders in firing order, just a bit of fuel through each when cranking. opened water drain and cranked, while lift pump jumped and my shop vac rigged up to dump port, yeah i know. hoping its not the IP, guessing it could be electrical? ive got the red *** something fierce, anybody had similar problems or got any insight?
#4
And I know this isn't what you want to hear but the only way to rule out the PMD is to have a good spare on hand and swap it out.