ACTUATOR Heater VALVE Any Help Greatly Appreciated
#1
ACTUATOR Heater VALVE Any Help Greatly Appreciated
I have a 1996 K2500 Suburban 6.5 Vin F. I currently have the motor and drivetrain out for maintenance, and cant for the life of me figure out where the vaccum lines for the ACTUATOR. Heater. VALVE go. I have searched my service manual, google, and google images. It is a small solenoid mounted to the right of the ac accumulator. It has to hose barbs and a 2 pin electrical connector. I am not sure if it was connected when removed, but my A/c is currently not working(looks like compressor clutch is slipping). Would this have to do with it? The previous owner screwed up some of the vaccum lines/ ellectrical wiring. Very frustrating . I have searched for full info on it for hours to no avail. Best i have found is lower hose connects to heater hose.
I believe it is GM PN 15165891
This website diagram shows it going to egr but i don't have an egr http://parts.nalleygmc.com/images/pa...07TC08-031.JPG
So anyone know where I hook this up? Any help is greatly appreciated. Thanks
I believe it is GM PN 15165891
This website diagram shows it going to egr but i don't have an egr http://parts.nalleygmc.com/images/pa...07TC08-031.JPG
So anyone know where I hook this up? Any help is greatly appreciated. Thanks
Last edited by AdrenalineJunkie; 04-06-2014 at 12:19 PM.
#2
The following users liked this post:
AdrenalineJunkie (04-06-2014)
Thread
Thread Starter
Forum
Replies
Last Post
Bill in Ballard
Ford 83-94 6.9 and 7.3L General
3
03-13-2016 07:42 PM
bonestock
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-01-2015 08:41 PM
cmalson
Chevy/GMC 6.2L and 6.5L
6
11-29-2014 12:57 PM