need help reading coads for obd1
#11
the ground strip broke on the passenger side and all i know is it gos to where the ops or somewhere in there an i dont know where the orther end all i can tell is it gose down behind the motor but where this truck is driveing me nuts i love it and will never get rid of it but i need to get her running what runs the sending unit
---AutoMerged DoublePost---
and i have AC Delco ops and AC Delco lift pump i just put on can can you tell me how to do the ops mob cuz each one i read is different i dont know what one to do
---AutoMerged DoublePost---
and i have AC Delco ops and AC Delco lift pump i just put on can can you tell me how to do the ops mob cuz each one i read is different i dont know what one to do
Last edited by kylek; 04-08-2013 at 12:15 AM. Reason: Automerged Doublepost
#13
OBD1 Code Reading
Howdy Folks,
First time poster here
I am reading my check-engine codes and I am getting (1) flash of code 12 then we get 5 consistent flashes - pause - then 3 flashes (the pause is pretty significant) and it does this (3) times. Then we get 6 consistent flashes - pause - 3 flashes and cycles (3) times.
These (2) codes seem to be 53 and 63 right..? Well everywhere I have read says code 12 will flash (3) times, not in my case.. Also everyone has said it will revert back to code 12 when completing the code reading cycles, not in my case -- the 53 and 63 codes keep repeating and repeating and repeating...
Any input would be awesome!
First time poster here
I am reading my check-engine codes and I am getting (1) flash of code 12 then we get 5 consistent flashes - pause - then 3 flashes (the pause is pretty significant) and it does this (3) times. Then we get 6 consistent flashes - pause - 3 flashes and cycles (3) times.
These (2) codes seem to be 53 and 63 right..? Well everywhere I have read says code 12 will flash (3) times, not in my case.. Also everyone has said it will revert back to code 12 when completing the code reading cycles, not in my case -- the 53 and 63 codes keep repeating and repeating and repeating...
Any input would be awesome!
Thread
Thread Starter
Forum
Replies
Last Post
stewart.william.c
24 Valve 2nd Gen Dodge Cummins 98.5-02
0
02-11-2015 01:39 AM