99 k2500 chevy suburban galup
#11
#14
6.5l turbo insanity
it all started with cruze on the high way on a down hill the truck would drop rpm to
maintain speed and then hit 2k rpm to pick up speed it would do it rather hard so i ??? it
a few times and didnt find any prob so took it too the dealer they said change the pump
and nothing about timming the pump so i asummed that it was like a 6.2 so i took it out
of my 96 parts truck and put it in mine and life was good then developed really hard
slamming on the highway as if the truck was comming apart but around town it was fine
it had lack in power and slugish but ran ok for the most part so one day i sat looking
under the hood and found the advance plug on the ip unplugged so when i plugged in the
advance plug on the ip i started the truck and it freaked out and what i mean by that is
at idle would not run below 1500 and it was very galupy like a gas engine with the choke
on and it would rev up on its own every few sec so i shut it off its my only truck and tried
plugging in my spare (new) pmd module and there was no change so i tried pulling the
computer and replaced my computer witch is 98 and put a 96 and its running normal
again but i cant just leave it like this i duno if the computer failed or something else is
wrong and the 96 program doesnt see it im kinda screwed here if u still cant understand
email me @ . . . jimmyboy762@yahoo.com and ill give u my phone number so i
can tell u cause its hard to type this all hahah thanks for ur help im just loosing my mind
maintain speed and then hit 2k rpm to pick up speed it would do it rather hard so i ??? it
a few times and didnt find any prob so took it too the dealer they said change the pump
and nothing about timming the pump so i asummed that it was like a 6.2 so i took it out
of my 96 parts truck and put it in mine and life was good then developed really hard
slamming on the highway as if the truck was comming apart but around town it was fine
it had lack in power and slugish but ran ok for the most part so one day i sat looking
under the hood and found the advance plug on the ip unplugged so when i plugged in the
advance plug on the ip i started the truck and it freaked out and what i mean by that is
at idle would not run below 1500 and it was very galupy like a gas engine with the choke
on and it would rev up on its own every few sec so i shut it off its my only truck and tried
plugging in my spare (new) pmd module and there was no change so i tried pulling the
computer and replaced my computer witch is 98 and put a 96 and its running normal
again but i cant just leave it like this i duno if the computer failed or something else is
wrong and the 96 program doesnt see it im kinda screwed here if u still cant understand
email me @ . . . jimmyboy762@yahoo.com and ill give u my phone number so i
can tell u cause its hard to type this all hahah thanks for ur help im just loosing my mind
Thread
Thread Starter
Forum
Replies
Last Post
Diesel Bombers
Latest Automotive Industry News
0
03-06-2015 08:10 AM
Diesel Bombers
Latest Automotive Industry News
0
11-01-2014 06:20 PM
Diesel Bombers
Latest Automotive Industry News
0
10-30-2014 11:50 AM
Diesel Bombers
Latest Automotive Industry News
0
10-16-2014 07:10 PM