When we took off the canopy, and rewired the pilot sign we lost a tail light on the drivers side. checked the fuses ..purple 30's both were melted but not burnt, and we changed them anyhow, with 15 amps. bulbs were fine.? still never worked.
have brake lights on both sides, and hazard lights, but on the same side of the hazard lights are blinking together and the passenger side they blink seperatly. any ideas?

Problems started when we had it all together,
the brake lights stayed on , so we had to re do it again..

yellow brown green and white......wires.

 

I'm gonna get some schematics together in the next couple of minutes, Jenn. I'll post them and we can go from there.

I wonder if your truck is considered a domestic built or an export though...

I'm going to guess domestic

 

ok johnny thanks.....

 

Here we go:

The first set of diagrams are all domestic and from about the 7 on down are export but you can see that in the title.

 

 

So did you check/change the 10 amp park light fuse in the underhood block?

 

so its in the brown somewhere? my licence plate light is out on that side too..

---AutoMerged DoublePost---

nope.
will do.

 

Yeah. Check the LR Park Fuse in the underhood block. It'll be red.

 

I dont see the fuse , can you show me where to look, nothing under the dash and nothing under the hood???? wtf.. blonde by nature, brunette hair right now, i really thought i could get away with it.........

 

It's under the hood on the driver's side. It'll be a black plastic cover. Pull it off, flip it over and it'll show you the fuse locations.