my k5
#1
#2
#3
looks good what motor & tranny?
---AutoMerged DoublePost---
I've seen an attempt to do that before the DMAX was too big for the frame but a 6.5L will go in it
---AutoMerged DoublePost---
I've seen an attempt to do that before the DMAX was too big for the frame but a 6.5L will go in it
Last edited by Lucas Amick; 07-19-2008 at 02:30 PM. Reason: Automerged Doublepost
#4
#5
#6
the 350 has...
edelbrock cam
edelbrock intake
650 carb
valve job
roller rockers
screw in studs
guide plates
and the ports are cleaned up.
and the trans is justa worn out 700r4, its gettin rebuilt within a few weeks but the guy that did my diesel but he mainly builts power glides and other trannys for races cars.
i have a hi-performance 4bolt main BBC in the garage but its waitin for a new home in a boat.
---AutoMerged DoublePost---
if it was to get anything it would get a 12v CTD but the mighty small block is just fine
edelbrock cam
edelbrock intake
650 carb
valve job
roller rockers
screw in studs
guide plates
and the ports are cleaned up.
and the trans is justa worn out 700r4, its gettin rebuilt within a few weeks but the guy that did my diesel but he mainly builts power glides and other trannys for races cars.
i have a hi-performance 4bolt main BBC in the garage but its waitin for a new home in a boat.
---AutoMerged DoublePost---
if it was to get anything it would get a 12v CTD but the mighty small block is just fine
Last edited by slowtowpig; 07-19-2008 at 04:35 PM. Reason: Automerged Doublepost